PCS Digital PCS Mail, Installation Manual

Page: 60 / 71

PCS mail
- 60 -
| Installation Manual |
Copy to High Memory
To create a copy of the customer’s data, select “Copy to high Memory”. This will
make a “Real Time” copy of the customer’s database. The display will indicate
each section being copied, i.e. “Copying Prompts”, “Copying Greetings”,
“Copying Messages”.
When the Copy Process is complete, the voicemail will return to the initial “Enter
Password” Screen.
Copy to Low Memory
To restore the customer’s data, select “Copy to low memory”. This will restore
the previously recorded “Real Time” copy.
When the Copy Process is complete, the voicemail will return to the initial “Enter
Password” Screen.
Erase high memory
To erase the memory area, select “Erase high memory”. This will eliminate any
data that is stored in the High memory. Also, if the Expansion Card is left in the
system when it is initialized, all data stored on it will be eliminated.
Remove the Expansion Card before initializing the system or the backup copy will be
erased.
The “Real Time Back-up is a snap shot of the customer’s database at the time this
process is run. It IS NOT, nor was it intended to be a running “Mirror Image” of the
voicemail system.