PCS Digital PCS Mail, Installation Manual

Page: 22 / 71

PCS mail
- 22 -
| Installation Manual |
Connecting the Voicemail with the Telephone system
o
Installation consists of mounting PCS mail on a flat, dry wall surface
and with the Analog voicemail, connect the supplied transformer to a
suitable 120 VAC outlet.
o
The Voicemail system should be installed within 10 feet from the
telephone system MDF. Be sure to leave at least one inch of space
around the perimeter of the voicemail and telephone systems.
o
With the analog voicemail, it is recommended that the power transformer
be plugged into an uninterrupted power supply (UPS). Especially, if the
installation depends on the systems (Voicemail and Telephone) being
active during momentary power interruptions.
o
Connect the Voicemail to the telephone system using standard modular
line cord connected to a modular jack, then to the MDF or Crimp a
modular plug directly to cross connect cable and attach it directly to the
MDF.
o
The ports are numbered from right to left. The Digital Systems will only
have 2 ports not 4.
Analog Voicemail:
RJ 14 Jack 1
Green/Red pair (inner)………….Port 1
RJ 14 Jack 2 Green/Red pair (inner)………….Port 2
RJ 14 Jack 3 Green/Red pair (inner)………….Port 3
RJ 14 Jack 4 Green/Red pair (inner)………….Port 4
Digital Voicemail:
RJ 14 Jack 1
Green/Red pair (inner)……….Port 1 & 2
RJ 14 Jack 2 Green/Red pair (inner)……….Port 3 & 4
4 | 3 | 2 | 1 JACK
Each Analog port connects
to the analog adaptor or
other analog port
Using the 2B + D technology
each port becomes 2 voice
mail ports
DO NOT PLUG ANALOG PORTS INTO THE DIGITAL VOICEMAIL!