PCS Digital PCS Mail, Installation Manual

Page: 29 / 71

PCS mail
| Installation Manual |
- 29 -
Programming a Voicemail Button
The PCS Digital™ System 24 has 3 feature button categories, used for feature button
programming: CO lines (co Ln), Station (sta), and Feature (feat). Whereas, the PCS Digital™
System 48 has only 2 feature button categories, used for feature button programming: Directory
Number (dir) and Feature (feat). The Directory Number (dir) is used for entering Station numbers
and CO Line numbers (System 48 CO lines values from 700-717)
Programming a Voice Mail Button
1. Press
f#3
2. Press a programmable feature button, such as the MSG button #20
3. Press [
chg
].
3. Press [
feat
] from the soft menu.
4. Press the fixed
f
button (located under the
h
button).
5. Enter
64
and press [
save
].
6. Press the
c
button.
The Voice Mail button (
f64
) is used to:
Message Waiting Indication
Operation:
1. Flashing red light on the programmed VM button
Access a Voice Mailbox
Operation:
1. From an idle station, Press the preprogrammed Voice Mail button. When the
Voice Mail answers it will prompt the user to enter their password.
Transfer a caller to a Voice Mailbox
Operation:
1. While on a CO line call
2. Press the VM button
3.
MAILBOX ID
: appears in the telephone display
4. Enter the Station or Mailbox number (Usually the same)
5.
Press the
t
button or simply hang up the handset.
Answering Machine Emulation
Operation:
1. When a call goes to Voice Mail, the Voice Mail lamp light turns green, Press the Voice
Mail button.
2.
MONITOR VM CALL
appears in the telephone display
3. Using the Softkey, Press
YES
to monitor the call
4.
MONITOR MODE
appears in the telephone display
5.
Using the Softkey, to answer the call press the
ANSWER
Digital Non-Display Telephone
Operation:
1. When a call goes to Voice Mail, the Voice Mail lamp light turns green, Press the Voice
Mail button.
2. Press
1
to Listen
3. Press
2
to answer
4.
Press
3
to stop listening