6
2. MeTeR SeT
Complete set of the meter includes:
1 pcs.
2
pcs.
-
PCE-
ND10 Meter
-
connection clamps
- user’s manual
1 pcs.
3. BASIC RequIReMeNTS AND
OPeRATIONAL SAfeTy
In the safety service scope, the transducer meets to
requirements of the eN 61010-1 standard.
Observations Concerning the Operational Safety:
•
The meter should be installed and connected only
by a qualified personnel. All relevant safety measures should
be observed during installation.
•
Always check the connections before turning the meter on.
•
Removal of the meter housing during the warranty period
voids the warranty.
•
This meter conforms to all requirements of the electromag-
netic compatibility in the industrial environment.
•
Building power network should include switch or automatic
circuit breaker positioned in the convenient vicinity of the
meter. It should be properly marked and available to opera-
tor at all times.
Summary of Contents for PCE-ND10
Page 7: ...9 5 3 Connection diagrams OUT Direct measurement in a 4 wire network PCE ND10...
Page 8: ...10 OUTimp Semi indirect measurement in a 4 wire network PCE ND10...
Page 15: ...17 6 4 Operating modes Fig 6 PCE ND10 meter operating modes...
Page 24: ...26 Fig 8 Alarm types x alarm no a b normal c off d on a n on b n oFF c On d OFF...
