14
6.3 Parameter display
In the measurement mode, values are displayed
according to set tables. Pressing button
or
allows user to switch between displayed base values (Table 1).
Pressing button
displays minimal value and pressing
button
displays maximal value. When these values
are displayed, pressing the
button resets all minimal
or maximal values. When buttons
and
are pres-
sed simultaneously, respective mean 3-phase values are dis-
played, together with minimal and maximal values (see Table 2).
RS-485 interface allows setting the values that are to be
displayed.
error display is described in section 8.
When reactive power is displayed, this indication is accompa-
nied by a symbol of the load: capacity load ( ) or inductive
load ( ).
Base values displayed in the field 17 (Fig. 4.). Option (parameter)
shown in the Table 1 indicated that displaying of this parame-
ter may be turned off in register 4056 via RS485. Turning this
parameter off (from u to tg) disables displaying their respective
mean / 3-phase values.
Summary of Contents for PCE-ND10
Page 7: ...9 5 3 Connection diagrams OUT Direct measurement in a 4 wire network PCE ND10...
Page 8: ...10 OUTimp Semi indirect measurement in a 4 wire network PCE ND10...
Page 15: ...17 6 4 Operating modes Fig 6 PCE ND10 meter operating modes...
Page 24: ...26 Fig 8 Alarm types x alarm no a b normal c off d on a n on b n oFF c On d OFF...
