7
4. INSTALLATION
PCE-
ND10 Meter is adapted to be mounted to the panel
with mounting brackets (see fig. 1). Meter housing is made
of plastic.
Housing dimensions: 96 x 96 x 77 mm. On the outer side of the
meter there are screw and tab terminal strips that can be used
for connecting external wires with diameter up to 2.5 mm
2
.
Prior to installation a 92.5
+0.6
x 92.5
+0.6
mm slot must be made
in the panel. The thickness of the panel material should not
exceed 15 mm. The meter must be placed in the panel from
the front. During installation the powering voltage must be
off. When the panel is inserted in the slot, mount it in place
with provided mounting brackets.
Fig. 1. Meter fitting.
Summary of Contents for PCE-ND10
Page 7: ...9 5 3 Connection diagrams OUT Direct measurement in a 4 wire network PCE ND10...
Page 8: ...10 OUTimp Semi indirect measurement in a 4 wire network PCE ND10...
Page 15: ...17 6 4 Operating modes Fig 6 PCE ND10 meter operating modes...
Page 24: ...26 Fig 8 Alarm types x alarm no a b normal c off d on a n on b n oFF c On d OFF...
