cpeconfig set
29
Model 3231 CLI Reference Guide
3 • CPE Config Commands
cpeconfig set
Note
This command is only available on the CO unit. Refer to the
Getting
Started Guide
for more information.
Set CPE configurable parameters.
Table 15. cpeconfig set
Command
Explanation
cpeconfig set defaultgw <newvalue>
Set default GW as format: xxx.xxx.xxx.xxx
cpeconfig set dslrateTS <newvalue>
Set DSL data rate as n_64kbps.
cpeconfig set ipaddress <newvalue>
Set IP Address as format: xxx.xxx.xxx.xxx
cpeconfig set netmask <newvalue>
Set Net Mask as format: xxx.xxx.xxx.xxx