ip show
96
Model 3231 CLI Reference Guide
8 • IP Commands
ip show
Display information for an IP interface.
Example Output: ip show debuginfo
--> ip show debuginfo
Found IP stack.
Interfaces:
-----------
IfIndex: 1 Name: ip1 Addr: 192.168.200.10 Mask: 255.255.255.0
All addresses:
192.168.200.10 255.255.255.0
192.168.200.11 0.0.0.0
IGMP membership:
DHCP: disabled MSS Clamp: disabled
Rx Filter: none Tx Filter: none
IfType: ETHER MAC: 00:a0:ba:03:71:0e
Virtual: No Device: //bridge
IfIndex: 16 Name: loopback Addr: 127.0.0.1 Mask: 255.0.0.0
All addresses:
127.0.0.1 255.0.0.0
IGMP membership:
DHCP: disabled MSS Clamp: disabled
Rx Filter: none Tx Filter: none
IfType: LOOP
Virtual: No Device: (null)
Routing table:
--------------
Dst: 0. 0. 0. 0 / 0 Gw: 192.168.200. 1 If: 1 Cost: 1
Dst: 10. 0. 0. 0 / 24 Gw: 0. 0. 0. 0 If: 1 Cost: 1
Dst: 192.168.200. 0 / 24 Gw: 0. 0. 0. 0 If: 1 Cost: 1
Dst: 127. 0. 0. 0 / 8 Gw: 0. 0. 0. 0 If: 16 Cost: 1
IGMP Proxy multicast forwarder:
-------------------------------
Upstream interface: none
Group address Interfaces
Pending socket messages:
Table 72. ip show
Command
Explanation
ip show
Display current RIP configuration and any other information global to
the router.
ip show debuginfo
Display debugging information.
ip show interface <name>
Display information about a named interface.
ip show route <name>
Display information about a named route.