ip set route
95
Model 3231 CLI Reference Guide
8 • IP Commands
ip set route
Configure settings for an IP route.
Note
Begin each top-level command in the table below with
ip set route <name>
.
Table 71. ip set route <name>
Command
Explanation
cost
<cost>
Set the number of hops counted as the cost of the route
for a route previously created.
destination <dest_ip>
<netmask>
Set the destination network address of a route previously
created.
gateway
<gateway_ip>
Set the gateway address of a route previously created.
interface
<interface>
Set the interface used by a route previously created.