pppoa set transport
118
Model 3231 CLI Reference Guide
12 • PPPoA Commands
pppoa set transport
Configure properties for a PPPoA transport.
Note
Begin each top-level command in the table below with
pppoa set transport <name>
.
Table 88. pppoa set transport
Command
Explanation
atmaddress
<atmaddr>
Set the ATM address for use in an ATM network.
autoconnect disabled
Disable autoconnect function.
enabled
Connect automatically to TCP/IP whenever a
user requests TCP/IP packets from a public desti-
nation.
bt
<bt>
Set the burst tolerance for an existing PPPoA
transport (PVC transports only).
createroute
disabled
No route is added to the system after IPCP nego-
tiation.
enabled
Add a route to the system after IPCP negotiation
dialin
pvc
<port><vpi><vci>
Create a PPPoA transport that accepts dialin con-
nections over a PVC (Permanent Virtual Circuit).
dialout
pvc
<port><vpi><vci>
Create a PPPoA transport that performs dialout
over a PVC (Permanent Virtual Circuit).
disabled
Disable PPPoA transport.
discoverdns
primary
disabled
Disable whether the primary DNS server address
is requested from a remote PPP peer using IPCP.
enabled
Request a primary DNS server IP address.
secondary
disabled
Disable whether the secondary DNS server
address is requested from a remote PPP peer
using IPCP.
enabled
Request a secondary DNS server IP address.
enabled
Enables PPPoA transport.
givedns
client
disabled
IPCP cannot request a DNS server IP address
and then give the address to the DNS client.
enabled
Allow IPCP to request a DNS server IP address
and then give the address to the DNS client.
relay
disabled
IPCP cannot request a DNS server IP address
and then give the address to DNS relay.
enabled
Allow IPCP to request a DNS server IP address
and then give the address to DNS relay.