![background image](http://html2.mh-extra.com/html/patton-electronics/industrial-ethernet-extender-with-lcd-interface/industrial-ethernet-extender-with-lcd-interface_cli-reference-manual_4081617111.webp)
ppp set transport
111
Model 3231 CLI Reference Guide
11 • PPP Commands
lcpmaxfail
<lcpmaxfail>
Set the LCP maximum fail number for an existing
transport.
lcpmaxterm
<lcpmaxterm>
Set the LCP maximum terminate number for an
existing transport.
localip
<ipaddress>
Only applies to dialin SVC or PVC transports that
provide the server-end of a connection.
mru
<mru>
Set the interface’s maximum receive unit (MRU)
(in bytes).
password
<password>
Set a dial-out password on a named transport.
remotedns
<ipaddress>
<ipaddress2>
Set the primary and secondary local DNS server
addresses that will be given to a remote PPP peer
when the peer requests a primary or secondary
DNS server IP address using IPCP.
remoteip
<ipaddress>
Set the remote end of the PPP connection during
negotiation.
routemask
<mask>
Set the subnet mask used by the route that is cre-
ated when a PPP link comes up.
specificroute
disabled
Create a default route to the subnet at the remote
end of the PPP link.
enabled
Allow the created route to apply to packets for
the subnet at the remote end of the PPP link.
subnetmask
<mask>
Set the subnet mask used for the local IP interface
connected to the PPP transport.
theylogin
chap
Set CHAP (Challenge Handshake Authentication
Protocol) for the authentication method remote
PPP clients must use to dialin to the server.
none
No authentication method is used.
pap
Set PAP (Password Authentication Protocol) for
the authentication method remote PPP clients
must use to dialin to the server.
username
<username>
Set a dial-out username on a named transport.
welogin
auto
The authentication protocol used by the remote
PPP server is discovered and used.
chap
Set CHAP (Challenge Handshake Authentication
Protocol); Server sends an authentication request
to the remote user dialing in.
none
No authentication method is used.
pap
Set PAP (Password Authentication Protocol);
Server sends an authentication request to the
remote user dialing in.
Table 82. ppp set transport
Command
Explanation