manualshive.com logo in svg

Patton electronics Industrial Ethernet Extender with LCD Interface..., Cli Reference Manual

Share
Download
Patton electronics Industrial Ethernet Extender with LCD Interface... Cli Reference Manual Download Page 160

system config

160

Model 3231 CLI Reference Guide 

18 • System Commands

system config

Manage the system configuration.

Table 118. system config

Command

Explanation

system config 
backup

Save system config as a backup file.

<filename>

Save the backup configuration on a webserver.

system config clear

Clear all configuration, only leaves superuser login.

system config restore

Revert to saved configuration.

backup

Restore the backup configuration from the file: 
//isfs/im.conf.backup.

<filename>

Specify the name of a file containing an alernative 
backup configuration.

factory

Restore the factory default configuration from the 
//isfs/im.conf.factory file.

minimal

Clear the current configuration by resetting attributes 
to their defaults and deleting interfaces and trans-
ports.

system config save

Save to main boot configuration file.

Summary of Contents for Industrial Ethernet Extender with LCD Interface...






























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands