Wireless Control Unit
14
15
5. Product Overview
5.3. Operation
This product works in conjunction with the following.
Transmitter
Receiver / Repeater
WIO
WIO
Contact input
When the input information
of the transmitter is
successfully sent to the
receiver, it lights up in light
blue for 1 second.
CH1 (LED Unit Red)
CH2 (LED Unit Amber)
CH3 (LED Unit Green)
CH4 (LED Unit
CH5 (LED Unit White)
CH6
Buzzer
CH1
Contact output
CH2
CH3
CH4
CH5
CH6
Non-Voltage
Contact Output
Relay output
(None)
Input
Output
Answerback
Bluetooth wireless
The receiver's contact output corresponding to the transmitter's contact input is as follows.
■
Receiver's Contact Outputs Corresponding to the Transmitter's Contact InputsContact Input
CAUTION
Maintain the input signal status for 100 ms or longer.
Input signals shorter than 100 ms may not be detected.
When using the transmitter's flashing COM to control
the receiver's buzzer unit, set the DIP switch to [Continuous beep].
100 ms or longer
Transmitter
CH1 - CH6,
Buzzer
100 ms or longer
When a signal is input to the transmitter's contact input (CH1-6, buzzer), the LED unit/ buzzer unit connected to
the transmitter/ receiver is also activated.
The LED unit/buzzer unit corresponding to each contact input is as follows.
■
LED Unit / Buzzer Unit Corresponding to Each
CH1
Each Contact Input
CH2
CH3
CH4
CH5
CH6
Buzzer
LED Unit Red
Additional Units
LED Unit Amber
LED Unit Green
LED Unit Blue
LED Unit White
(None)
Buzzer Unit
* When using the transmitter's flashing COM
to control the receiver's buzzer unit,
set the DIP switch to [Continuous Beep Sound].
