Patlite WIO-B1T, Instruction Manual

Page: 31 / 88

Wireless Control Unit
30 31
7. Operation
CAUTION
When pairing multiple products at the same time, use separate group IDs.
Failure to follow the instruction may result in unintended pairing or failure to pair between products. If pairing between
products is unintended, please unpair and pair again.
(Refer to "7.6. How to Unpairing" (
☞
page 33))
When pairing devices with the same group ID, Turn on the power for each device in the order in which they are to be paired.
Simultaneous power on may result in unintended pairing between products. If pairing between products is unintended,
please unpair and pair again.
(Refer to "7.6. How to Unpairing" (
☞ page 33))
When the relay function switch is turned OFF, the pairing information is released. If the relay function switch is turned
ON, pairing must be performed again.
The receiver at the end of the line must be operated with the relay function turned off.
For products that are not paired, turn off the power.
This product does not allow pairing of four or more repeaters.
If the product is replaced for maintenance, cancel the pairing of each product and perform pairing again from the
transmitter side.
7.5.1. How to Set Pairing
• When pairing, confirm that the transmitting and receiving products are turned off.
• Read "7.2. About the DIP Switches and Reset Button" ( ☞ page 20) before handling the Group ID DIP Switch.
●
How to Pair the Transmitting Product
Head Cover
- Transmitting product -
❷
❸
❹
Flashing blue
❺
Indicator
Ready for pairing
Group ID DIP Switch
WIO Body
Unit
Remove the head cover from the WIO body unit.
❷
Set the Group ID DIP Switch.
❸
Attach the head cover to the WIO body unit.
❹
Turn on the transmitting product and confirm
that the indicator is flashing blue.
❺
• Match the Group ID of the Group ID DIP Switch with
the receiving product to be paired.
Pairing will not occur unless the Group ID matches.
• Specify the Group ID from 1 to 8.
For information on how to allocate each group ID,
refer to "7.3.1.1. How to Set the Group ID" (
☞
page 23).
Confirm the transmitting product is turned off.
❶
ㅣ
The indicator flashes blue when the transmitter product
is ready for pairing.