Wireless Control Unit
26
27
7. Operation
7.4.2. One-shot Mode
• This product can hold the output of the receiving product (hold output/output for 12 seconds) by pressing the ON
input when the transmitting product is emitting the OFF input.
•
The output hold time can be set (hold output/output for 12 seconds) by the receiver's One-shot Mode output time setting.
• Read "7.2. About the DIP Switches and Reset Button" (
page 20) before handling the DIP switches.
WIO
Transmitter
ON Input
OFF Input
Hold output
ON output
OFF output
ON output
OFF output
Repeater
WIO
ON output
OFF output
ON output
OFF output
Hold output
Receiver
WIO
12 seconds
12 seconds
12 seconds
12 seconds
Setting
Setting
Function
DIP Switch
Function
DIP Switch
Function
DIP Switch
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Output for
12 seconds
Output for
12 seconds
ON
ON
ON
ON
CAUTION
When it is set to output for 12 seconds and multiple inputs are received, outputs for 12 seconds from the timing
of the last input.
Due to wireless communication, the usage environment, and the number of repeaters, the timing of the output
may be delayed.
Point
●
During output, if one-shot output clear is performed or the power for the receiver is turned off, the output is stopped.
For information, refer to "7.4.2.1. One-shot Output Clear" (
●
For information on how to set One-shot Mode for the receiver/repeater, refer to
