Wireless Control Unit
24
25
7. Operation
7.3.2.2. List of Functions for the Function DIP Switch (Transmitter)
Switch Number
Function Name
Operation
Description
1
Unpairing
OFF: Disabled (factory default)
ON: Execute unpairing
Switch for unpairing.
Do not use when operating.
2
Level Mode /
One-shot Mode
OFF: Level Mode (factory default)
ON: One-shot Mode
Specify whether the input is detected at
level (input ON or OFF) or at one-shot (rising
ON from OFF).
3
Input logic switching
OFF: Input logic A (factory default)
ON: Input logic B
Specify input logic A or B.
7.3.2.3. List of Functions for the Function DIP Switch (Receiver)
Switch Number
Function Name
Operation
Description
1
Unpairing
OFF: Disabled (factory default)
ON: Execute unpairing
Switch for unpairing.
Do not use when operating.
2
One-shot Mode
output time*
OFF: Output for 12 seconds
(factory default)
ON: Hold output
Specifies the output time in One-shot Mode.
3
Not used
–
(Factory default: OFF)
Do not use.
* This is valid only when the transmitting product is set to one-shot mode.
CAUTION
If the Function DIP switch is changed during operation (when the power is turned on), the setting is not reflected.
After setting the Function DIP switch, turn the power OFF→ON or press the reset button on the main unit to reflect the setting.
Reset Button
(Reboot Main unit)
You cannot set functions channel by channel. All input channels and all output channels have common settings.
