Wireless Control Unit
32
7. Operation
●
How to Pair the Receiving Product
Head Cover
❼
❾
❿
- Receiving product -
❽
Ready for pairing
Blue light on
Indicator
Group ID DIP Switch
WIO Body
Unit
●
Common (Transmitting and Receiving Products)
Pairing complete
Green light on
Indicator
- Transmitting product -
- Receiving product -
⓫
Point
●
When the relay function of the receiver at the end of the line is turned on, the product can be used as a repeater.
Remove the head cover from the WIO body unit.
❼
Set the Group ID DIP Switch.
❽
Attach the head cover to the WIO body unit.
❾
Turn on the receiving product and confirm that
the indicator is lit blue.
❿
Confirm the indicators on the transmitting and
receiving products are lit green.
⓫
• The switch No. of the Group ID DIP Switch should
match the transmitting product to be paired.
If the switch No. does not match, pairing will not
occur.
• Specify the Group ID from 1 to 8.
For information on how to allocate each group ID,
refer to "7.3.1.1. How to Set the Group ID" (
• When pairing is complete, the indicator changes from
lit blue/flashing blue to lit green.
•
If the blue light continues to flash/light up for awhile,
the installation environment may be poor, such as
the group ID being incorrect or the sending/receiving
product being out of range. Please reconsider the
installation location.
• If the receiving product is a repeater, the indicator will
change to flashing blue after pairing is complete.
ㅣ
The indicator lights up blue when the receiving product
is ready for pairing.
Confirm the receiving product is turned off.
❻
