Parrot ANAFI USA GOV, User Manual

Page: 102 / 126

102
mountain and the drone aims at the bottom of the mountain. If the target is above
the pilot, the distance between the pilot and target is positive.
Different distance display modes
Pressing the rectangle containing the horizontal/vertical distances allows you to
switch to the display with an oblique distance, i.e., the slant distance between the
reference and the target.
Horizontal and vertical distance display Slant distance display
long press on the coordinates to copy the data.
The coordinates do not show under the following conditions:
- No connection between Anafi USA and the Skycontroller USA
- No GPS data from Anafi USA
- No GPS data from the Skycontroller USA .
- The pilot aims at the sky
(3) CoT action buttons on the right of the screen
3 action buttons appear on the right of the CoT title
Coordinate display lock button:
Tap to lock the element state to make it easier to copy the coordinates.
Tap again to unlock the element.
A yellow outline indicates that the element is locked.
Note : You cannot take a screenshot when the lock is activated.
Calibration button:
Calibration is optional but recommended. Calibration improves the
accuracy of the measurement.
An orange icon indicates calibration is recommended.