Parrot ANAFI USA GOV, User Manual

Page: 4 / 126

4
Prerequisites
1. Wake up your
ANAFI USA
’s smart battery. Charge the
battery
using one of the
enclosed USB - A to USB-C cables and the enclosed charger . The battery’s LEDs
start to flash indicating that the battery is awake. Let it charge while you read.
Parrot recommends you always run a full charge of your smart battery before
flying
ANAFI USA.
2. Press the power button of the Parrot Skycontroller USA for three seconds to
power it on. Recharge it by connecting its USB-C port to a power source, for the
update of the device.
ANAFI USA
’s controller is also a powerful Android tablet,
dedicated to your aerial operations.
Tip: You can adapt the brightness of your screen to your flight conditions.
Parrot Skycontroller USA: bottom panel
Under the
watertight cover:
Reset USB-A RJ45 USB-C Power
3. We recommend you connect your Parrot Skycontroller USA to a network (by
Wi-Fi or through an RJ45 cable) to perform the required updates (operating
system, Android applications, etc.) and to begin personalizing it.
4. FreeFlight 6 ,
ANAFI USA
’s piloting software , is preinstalled on the Parrot
Skycontroller USA.
Refer to the “
Presentation of Parrot Skycontroller USA ”
section of this guide additional information.