User Guide v6.9.0GOV
–
© Parrot, January 20, 2023
61
I
NSTALLING AND ACTIVATING EXTERNAL ANTENNAS
The
Parrot Skycontroller USA
is equipped
with two external 50 ohm coaxial female
antenna connectors (TNC)
,
which enable you to connect it to external antennas.
Compatible passive antennas must respect the following specifications:
-
Connectors:
male TNC
-
Frequencies:
2400-2480 MHz, 5150-5250 MHz, and 5750-5850 MHz
-
Gain:
>5 dBi
-
Polarization:
Vertical
-
Radiation pattern Omnidirectional
-
Impedance
50 ohms
-
Cable length
as short as possible to limit losses
Installing external antennas
1.
Remove the protective caps from the female TNC connectors of the
Skycontroller USA.
2.
Screw the external antennas male TNC connectors to the female TNC
connectors of the
Skycontroller USA.
Activating the external antennas
1.
Power the
Skycontroller USA
on.
2.
Wait until
FreeFlight 6
launches
.
3.
Press and hold simultaneously the
+
(plus),
-
(minus) and
Optics reset
buttons of the
Skycontroller USA
.
4.
The status LED of the
Skycontroller USA
turns to turquoise.
5.
The external antennas are activated, and the inbuilt antenna of the
Skycontroller USA
isdeactivated.
Reverting to the inbuilt antenna
1.
Power the
Skycontroller USA
on.
2.
Wait until
FreeFlight 6
launches
.
3.
Press and hold simultaneously the
+
(plus),
-
(minus) and
Optics reset
buttons of the
Skycontroller USA
.
4.
The status LED of the
Skycontroller USA
turns to dark blue.
5.
The external antennas aredeactivated, and the inbuilt antenna of the
Skycontroller USA
is activated.
Summary of Contents for ANAFI USA GOV
