Parrot ANAFI USA GOV, User Manual

Page: 18 / 126

18
LED status indicator codes
When the Parrot Skycontroller USA is powered on, its LED status indicator gives you
an instant visual indication:
-
Steady green: Skycontroller USA Maintenance Mode;
-
Flashing green: Skycontroller USA update in progress;
-
Light blue/dark blue alternating: connecting to
ANAFI USA
;
-
Flashing light blue: no drone configured or wrong WPA key;
-
Steady dark blue: connected to
ANAFI USA
;
-
Purple/dark blue alternating autonomous flight in progress;
-
Red/any color alternating: low battery alert (
ANAFI USA
,
Skycontroller USA, or both), or RTH alert.
Skycontroller USA Maintenance Mode
You must set the Skycontroller USA to Maintenance Mode to access the tablet’s
data (screenshots, downloaded media), and to install maps (batches of PNG images,
compressed together in a ZIP archive).
Equipment required:
-
a laptop or tabletop computer equipped with a USB-A port;
-
a USB-A to USB-C cable.
To activate the Maintenance Mode, power the Skycontroller USA on and connect its
USB- C port to the computer’s USB -A port.
Press and hold the RTH button of the Skycontroller USA , then activate its reset
button with the tip of a paperclip or, a pen.
The LED of the Skycontroller USA turns light blue, then, after approximately three
seconds, it turns green.
When the LED turns green, release the RTH button.
If a pop-up appears on the screen of the Skycontroller USA , accept the connection
with the host computer.
After a few seconds, the internal memory of the tablet associated to the
Skycontroller USA appears on the screen of your computer:
“Galaxy Tab A (8.0’’, 2019)/Tablet”.