Appendix B – Non-Compumotor Motors
95
PM
Phase A Windings
Phase B Windings
1
2
3
4
2
1
4
3
8-Lead Motor – Labeling the Leads
You can configure the 8-lead motor in series or parallel.
Series Configuration
Use the following procedure for series configurations.
1.
Connect A2 & A3 together and relabel this common point
A CENTER TAP.
2.
Connect B2 & B3 together and relabel this common point
B CENTER TAP.
3.
Relabel the A1 lead
A+
.
4.
Relabel the A4 lead
A–
.
5.
Relabel the B1 lead
B+
.
6.
Relabel the B4 lead
B–
.
7.
Proceed to the
Terminal Connections section below.
Parallel Configuration
Use the following procedure for parallel configurations.
1.
Connect motor leads A1 & A3 together and relabel this common point
A+
.
2.
Connect motor leads A2 & A4 together and relabel this common point
A–
.
3.
Connect motor leads B1 & B3 together and relabel this common point
B
+.
4.
Connect motor leads B2 & B4 together and relabel this common point
B
–.
5.
Proceed to the
Terminal Connections section below.
