manualshive.com logo in svg

Parker DCP3, Installation Manual, Page: 34 / 71

Share
Download
Parker DCP3 Installation Manual Download Page 34

Drive Controlled Pump

Parker Hannifin Corporation

Hydraulics Group

DCP Manual innen A4 UK.indd  06.11.17

34

Manual

The individual status conditions are indicated pictorially:

Run, Stop and Direction

Running in the positive direction
Running in the negative direction

Stopped, (ready to run in the positive direction)

Stopped, (ready to run in the negative direction)

Trip

Drive tripped, (indication flashing)

Warning

Soft key action indication

The use of Soft Key 1 and Soft Key 2 is indicated on the 
bottom line of the display by the icon shown above the key.

Return:

Abort:

Toggle between Local and Remote modes

Soft Key 1

Softkey 1 is used as return or abort.

Soft Key 2

2 softkey is used to select the mode for the start / stop 
control.

When navigating around the menu tree, the return func-
tion navigates to the previous level. In this case the re-
turn is the opposite of the OK key.
When changing a parameter value the Abort key discards 
any modifications and leaves the parameter unchanged.

Left side

Right side

Run, stop and 
direction 

Trip 

Ethernet 

Control source

Ethernet

IP Address missing, (indication flashing)

IP Address configured

Control source

Start / stop control from the keypad

Start / stop control from the terminals

Start / stop control from a communications master

Summary of Contents for DCP3








































































Reviews:

No comments