manualshive.com logo in svg

Parker DCP3, Installation Manual, Page: 20 / 71

Share
Download
Parker DCP3 Installation Manual Download Page 20

Drive Controlled Pump

Parker Hannifin Corporation

Hydraulics Group

DCP Manual innen A4 UK.indd  06.11.17

20

Manual

General Purpose I/O Option

Option Modules

There are a range of Option Cards that may come factory-fitted to the AC30V.

Note:

If any of X20/01 to X20/04 is to be configured as digital 
output, then X20/05 must be connected to the positive 
output from a 24V supply and X20/06 must be connect-
ed to the negative output from the same supply.

Digital input and output ports are fully isolated from the 
drive electronics. Therefore it is essential that X20/06 is 
grounded at an appropriate point in the system.

Example:

Product Code

Description

7004-01-00

General Purpose I/O Option, referred to as GPIO
Digital Inputs or Outputs, Analogue Inputs, 
Motor Thermistor Input, Volt-free Relay 
Outputs, Real-Time Clock

7004-02-00

Motor Thermistor Input

7004-03-00

Motor Thermistor and Real-Time Clock

7004-04-00

Pulse Encoder and Motor Thermisto

Terminal

Name

Range

Description

X20/01

DIN11/ 
DOUT11

0 to 
24 VDC

Digital Input / Output 11 See 
the notes below.

X20/02

DIN12/ 
DOUT12

0 to 
24 VDC

Digital Input / Output 11 See 
the notes below.

X20/03

DIN13/ 
DOUT13

0 to 
24 VDC

Digital Input / Output 11 See 
the notes below.

X20/04

DIN14/ 
DOUT14

0 to 
24 VDC

Digital Input / Output 11 See 
the notes below.

X20/05

24V DC 
Input

24 V ± 
10 %

24V DC Input. Required to 
power digital outputs 
DOUT11 to DOUT14. 
See the notes below.

X20/06

DIG 0V

0 V

0 V reference for digital inputs 
and outputs. 
See the notes below.

Summary of Contents for DCP3








































































Reviews:

No comments