DOC-0017-03-EN: AC15 Series - Hardware Installation Manual
72 (125)
DOC-0017-03-EN-B 04.04.2023
- The drive will enable and should accelerate the motor to the speed demanded. Parameter
0105
(
Speed Percent
) provides the real time speed feedback (% of motor nameplate rpm) value.
- When the drive is running, the drive will show the following status indication:
Drive ‘Running’ Indication
Onboard Keypad Display
6901 Remote Keypad Display
Motor ‘
Running
’ icon ‘rotates’ in the direction of
the shaft.
Motor ‘
Running
’ LED Illuminated, motor
‘
Stopped
’ LED off.
The shaft will rotate in the direction indicated by
the direction LEDs:
‘
FWD
’ direction:
‘
REV
’ direction:
4. Stopping The Drive:
To stop the drive:
- Press the ‘
Stop
’ key:
Local ‘Stop’ Mode Initiation
Onboard Keypad Display
6901 Remote Keypad Display
The drive should decelerate the motor to a standstill, before disabling:
Drive ‘Stopped’ Indication
Onboard Keypad Display
6901 Remote Keypad Display
,
Motor ‘
Running
’ icon will continue ‘rotating’ during
motor deceleration, until the motor has come to a
stop
.
Motor ‘
Stopped
’ LED will flash during motor
deceleration, until the motor has come to a stop,
when the ‘
Stopped
’ LED will illuminate.