![background image](http://html1.mh-extra.com/html/parker/ac15-series/ac15-series_hardware-installation-manual_3771528071.webp)
DOC-0017-03-EN: AC15 Series - Hardware Installation Manual
DOC-0017-03-EN-B 04.04.2023
71 (125)
- At the end of the ‘Autotune’ routine, the motor will decelerate to a stop and the drive will disable:
Drive ‘Stopped’ Indication
Onboard Keypad Display
6901 Remote Keypad Display
Motor ‘
Running
’ icon will continue ‘rotating’ during
motor deceleration, until the motor has come to a
stop
.
When the motor has come to a stop, the
‘
Running
’ LED will turn off, and the ‘
Stopped
’
LED will illuminate.
- The drive is now ready to run in ‘Vector Control’ mode.
3. Running The Drive:
To run the drive:
- Navigate to the ‘
Operator
’ menu:
Top Level Menu Overview
Onboard Keypad Display
6901 Remote Keypad Display
- Set the parameter
0459
(
Local Setpoint
) to the desired speed setpoint (% of motor nameplate
rpm):
‘Operator’ Menu Overview (‘Local’ Mode)
Onboard Keypad Display
6901 Remote Keypad Display
- Press the ‘
Run
’ key:
Local ‘Run’ Enable
Onboard Keypad Display
6901 Remote Keypad Display
r 1.1
OPEr
SEt
dIAG
VER 1.1.1
Operator
Setup
Diagnostics
OPEr
P
0459
P
0105
Operator
Local Setpoint
Speed Percent