Parata Systems AccuCount II, User Manual

Page: 100 / 150

AccuCount II User Guide
4–46 120-0313 Rev 04
Position 3 [ Total ,
any option as shown in
Table 4-31 ]
Defines the information to output on position 3.
Position 4 [ Mean ,
any option as shown in
Table 4-31 ]
Defines the information to output on position 4.
Position 5 [ StdDev ,
any option as shown in
Table 4-31 ]
Defines the information to output on position 5.
Position 6 [ StdDev% ,
any option as shown in
Table 4-31 ]
Defines the information to output on position 6.
Position 7 [ Linefeed ,
any option as shown in
Table 4-31 ]
Defines the information to output on position 7.
Position 8–15 [ Off ,
any option as shown in
Table 4-31 ]
Defines the information to output on positions 8 through 15.
All positions OFF To set all of the positions in the application’s Statistics - Protocol -
Result to
Off :
1 Press the Enter soft key to select Set .
The scale displays the Set all Positions off? prompt.
2 Press the Yes soft key to confirm the reset;
or press the Cancel soft key to back out.
Set default settings To restore the factory default settings for all positions in
the Protocol:
1
Press the Enter soft key to select Set .
CAUTION The scale immediately restores the default settings,
without prompting you to confirm!
Table 4-30: Statistics - Protocol - Result settings and procedures (cont’d)
Setting Function