27
7
PRODUCT SYMBOL DEFINITIONS
z
z
Maximum user weight
z
z
Manufacturer
* It may be called “Legal
Manufacturer” or “Brand Owner” etc.
* This symbol is not applicable in
the country of origin.
z
Country of manufacture (Made in Japan)
z
z
Manufacturing site
* In the country of origin, the site
acts as the manufacturer.
z
Date of manufacture (YYYY-MM-DD)
z
z
Total weight including load
capacity
z
z
Authorized representative in the
European Community
z
z
Serial number
z
z
Medical Device
(This product is a medical device
in Europe, and may be a medical
device in some countries and regions
depending on their regulations.)
z
z
Model number
z
z
Lot number
z
Unique Device Identifier
This is a 2D Code (GS1 DataMatrix)
that encodes the UDI (Unique Device
Identifier) required by the Unique
Device Identification System designed
to adequately identify devices through
distribution and use.
8
REGULAR INSPECTION AND DAILY MAINTENANCE
z
For safety in use, inspect the product regularly, at least once a year. The product exhibits wear and deterioration according
to the frequency and conditions of use. Regularly inspect for parts looseness, the operation of moving parts, and the
presence of damage. If you notice an irregularity or want a detailed inspection, contact Paramount Bed or your distributor
(see “Contact Information” on p. 30). If abnormal noise occurs during use, apply a lubricant (see the following illustration).
z
Keep the stretcher and mattress away from water and humidity because they may cause rust,
breeding of bacteria, and generation of abnormal noise. If water gets on them, immediately wipe it off.
<Maintenance and inspection items to be completed by the user of the product>
Main Unit
• The position operations using the height adjusting handle or back-raising lever are to be working properly.
•
There are not to be any abnormal sounds produced or significant rattling when positioning operations are performed.
• There is not to be any deformation, damage, or detachment of bumpers or resin parts.
• There must not be any peeling of labels, and the text must be legible.
• There are not to be any scratches on or deformation of the mattress base, frame, or any other parts.
Transfer Board
•
The safety lock is to be locked properly and firmly.
•
There is not to be any significant rattling present.
Casters
• There are not to be any abnormal sounds produced while the bed is being moved.
• There is not to be any abnormal vibration occurring while the bed is being moved.
• Operations are to run properly.
• Operations to lock/release the casters are to run properly.
• Operation controls are to run smoothly without any abnormal resistance.
• The bed is not to move while the casters are in the locked position.
• The bed is to move smoothly while the lock is in the released position.
Main frame
Transfer board
Areas to be lubricated (four locations)
Rotating part of the transfer board
Areas to be
lubricated
(eight locations)
Main frame
HL link
Base frame
HL link connection point
Areas to be
lubricated
(two locations)
HL linkage
shaft
Interlocking link
HL linkage shaft connection point
Tip of the HL shaft unit
Areas to be lubricated
Shaft unit link
Tip of the HL shaft unit
Cam shaft holder
CL connecting
pipes
Areas to be lubricated
(two locations)
CL interlocking pipe connection point
