20
To store
1
Close the hooks and adjust the sliding pipe to the
shortest length.
2
Align the thumb screw knob (for locking the sliding
pipe) of the IV Pole with the groove on the IV Pole
storage holder or tray and store away the IV Pole.
2
Open the hooks at the tip when using the IV Pole.
NOTE!
z
z
The load capacity of each hook is 1kg.
Hooks
WARNING
z
z
When using the IV Pole, do not put a hand or arm between the base or transfer
board and the IV Pole. The body part may get caught, resulting in injury.
z
z
The load capacity of each hook is 1kg. Do not hang an article exceeding the
load capacity because it may damage the hook, resulting in injury. After inserting
an oxygen cylinder into the oxygen cylinder holder, tighten the thumb screw
knobs properly. Otherwise, the oxygen cylinder may move unexpectedly or drop,
resulting in an injury or damage.
z
z
Do not adjust the sliding pipe length while articles are hanging on the hooks.
When the thumb screw knob (for locking the sliding pipe) is loosened, the sliding
pipe may unintentionally fall, resulting in injury.
z
z
Before use, make sure the thumb screw knob (for locking the sliding pipe) is firmly
tightened. The sliding pipe may unintentionally fall, resulting in injury.
z
z
Attach an infusion bag or other article to a hook properly. The infusion bag or other
article may unexpectedly fall, resulting in injury or damage to the infusion bag or
other article.
WARNING
z
z
When not using an IV Pole, close the hooks, adjust the IV Pole to the shortest
length, and store the IV Pole in the IV Pole storage holder in the lower part of
the back section base or in the IV Pole storage space on the tray. If not stored
properly, the IV Pole could hit other parts when the height of the stretcher is
adjusted, causing damage or deformation of the IV Pole or stretcher.
Thumb screw knob
(for locking an IV Pole)
Back section base
Align the thumb screw knob (for locking the sliding pipe)
with the groove on the holder and store away the IV Pole.
Hooks (folded when stored)
IV Pole (C57E)
IV Pole storage holder
* Can be stored here when it is not in use.
IV Pole attachment hole
Hooks
* An IV Pole can be stored
in the tray.
