A. Configuration Options
A-8
April 2003
8799-A2-GB20-10
NOTE:
DSL Port Threshold Traps options are only available when
DSL Mode is set to
STU-C (see
Table A-6, System Options
).
Table A-3.
DSL Port Threshold Trap Options
ES Trap Threshold
Possible Settings:
1–900, or 0 to Disable
Default Setting:
120
Specifies the threshold for Error Seconds events in a 15-minute interval after which a
trap will be sent.
SES Trap Threshold
Possible Settings:
1–900, or 0 to Disable
Default Setting:
15
Specifies the threshold for Severely Error Seconds events in a 15-minute interval after
which a trap will be sent.
UAS Trap Threshold
Possible Settings:
1–900, or 0 to Disable
Default Setting:
0
Specifies the threshold for Unavailable Seconds events in a 15-minute interval after
which a trap will be sent.
LOSW Trap Threshold
Possible Settings:
1–900, or 0 to Disable
Default Setting:
0
Specifies the threshold for Loss of Sync Word Seconds events in a 15-minute interval
after which a trap will be sent.
CRC Trap Threshold
Possible Settings:
1–900, or 0 to Disable
Default Setting:
0
Specifies the threshold for CRC events in a 15-minute interval after which a trap will
be sent.
Attenuation Trap Threshold
Possible Settings:
1–127 dB, or 0 to Disable
Default Setting:
0
Specifies the threshold for loop attenuation in a 15-minute interval after which a trap
will be sent.
Margin Trap Threshold
Possible Settings:
1–15 dB, or 0 to Disable
Default Setting:
0
Specifies the threshold for the Signal-to-Noise ratio margin in a 15-minute interval
after which a trap will be sent.
