3. Initial Startup and Configuration
3-10
April 2003
8799-A2-GB20-10
5. Position the cursor at the Start Transfer field. Use the spacebar to select Yes.
Press Enter.
When the data transfer is complete:
— If you selected Yes in Step 4, the card is reset.
— If you selected No, the Transfer Status field changes to
Completed
successfully
.
If you specified
No
(the default) in the Immediately Apply Download field in
Step 4, you must now apply the download.
Procedure
To apply the downloaded firmware:
1. Press the Escape key to return to the Control menu. Select Apply Download.
2. On the Apply Download screen, type
Yes
to reset the card and activate the
code.
Selecting Yes causes the line card to reset.
NOTE:
The line card has two flash memory banks to hold executable firmware. You
can switch between these two firmware versions by applying the firmware
listed on the Apply Download screen.
main/control/apply_download
Slot: 4 Model: 8799
APPLY DOWNLOAD
Switch To Code Revision A01.00.02: No
WARNING:
An answer of “yes” will cause the system
to reset as if it had been powered off and on!
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Select: Yes, No LOS at Net, Pt 1
