4. Monitoring the Card
4-4
April 2003
8799-A2-GB20-10
DSL LOSW
Threshold, Pt
n
The number of LOSW seconds
for the DSL interface has
reached or exceeded the
configured threshold within a
15-minute interval.
1. Disable the trap by setting it
to 0.
2. Reconfigure the card to a
higher DSL LOSW Trap
Threshold.
3. Contact network provider to
troubleshoot the line.
DSL Margin
Threshold
, Pt n
The signal-to-noise margin has
reached or dropped below the
configured threshold within a
15-minute interval.
1. Disable the trap by setting it
to 0.
2. Reconfigure the card to a
lower DSL Margin Threshold.
3. Contact network provider to
troubleshoot the line.
DSL SES
Threshold, Pt
n
The number of severely
errored seconds for the DSL
interface has reached or
exceeded the configured
threshold within a 15-minute
interval.
1. Disable the trap by setting it
to 0.
2. Reconfigure the card to a
higher DSL SES Threshold.
3. Contact network provider to
troubleshoot the line.
DSL UAS
Threshold, Pt
n
The number of unavailable
seconds for the DSL interface
has reached or exceeded the
configured threshold within a
15-minute interval.
1. Disable the trap by setting it
to 0.
2. Reconfigure the card to a
higher DSL UAS Threshold.
3. Contact network provider.
EER at G.703, Pt
n
An EER (Excessive Error
Rate) condition has been
detected on the G.703
interface.
1. Verify that the card’s line
framing and line coding are
compatible with the attached
equipment.
2. Verify proper STU-R and
STU-C configuration.
3. Contact network provider.
IBMC Not
Supported on MCP
The Inband Management
Channel (IBMC) is enabled
and the MCP card does not
support Inband Management.
1. Disable the Inband
Management Channel.
2. Download the MCP with a
version of code that supports
inband management.
IP Type Mismatch
The STU-R and the STU-C are
operating in different NMS
management modes. One of
the cards is in IP Complex
mode while the other is in IP
Conservative mode.
Ensure that the STU-R and
STU-C are operating in the same
mode.
Table 4-1.
Health and Status Messages (2 of 4)
Message
What Message Indicates
What To Do