3. Initial Startup and Configuration
3-12
April 2003
8799-A2-GB20-10
Restoring Access to the User Interface
Improper configuration of the card could render the user interface inaccessible. If
this occurs, access can be restored using the MCC.
Procedure
To reset the TDM SHDSL card from the DSLAM’s management card:
1. Follow this menu selection sequence:
Configuration
→
Slot
→
Reset Card
2. Enter
DSL
nn
, where
nn
is the slot number for the DSL card you wish to reset.
3. Enter
Reset
.
4. Enter
Y
if you want to clear NVRAM also, otherwise enter
N
.
Entering
Y
restores the Default Factory Configuration.
5. Enter
Y
at the prompt to confirm.
NOTE:
When you enter
Y
, all data connectivity is interrupted.
You can also restore access to the user interface by reloading the Default Factory
Configuration options using the TDM SHDSL card’s menus.
Procedure
To restore access to the user interface using the TDM SHDSL card’s menus:
Main Menu
→
Configuration
→
Default Factory Configuration
Resetting the Card
If the user interface is functional and you would like to reset the card without
removing it from the DSLAM, you can reset the card from the Control menu.
Procedure
To reset the card from the Control menu:
1. Follow this menu selection sequence:
Main Menu
→
Control
→
Reset Device
The message
Are you sure?
appears.
2. Enter
Yes
.