A. Configuration Options
A-12
April 2003
8799-A2-GB20-10
Copy Port Options
You can copy the configuration options of G.703 interface and DSL loop to another
using the Copy Ports screen. For Copy Ports options, refer to
Table A-5, Copy
Ports Options
. To access the Copy Ports screen, follow this menu selection
sequence:
Main Menu
→
Configuration
→
Current Configuration
→
Copy Ports
Table A-5.
Copy Ports Options
From: Port
n
Possible Settings:
1
,
2
,
3
,
4
,
5
,
6
,
7
,
8
Default Setting:
1
Controls the source of the configuration options.
1– 8
– The configuration of the selected port is copied.
To: Port
y
Possible Settings:
1
,
2
,
3
,
4
,
5
,
6
,
7
,
8
,
All
Default Setting:
2
Controls the target of the configuration options.
1– 8
– The configuration of the selected port is replaced. If Perform Copy Then Increment
is selected, the port number is incremented by 1 after the copy.
All
– The configurations of all ports are replaced by the configuration of the selected
From: Port.
NOTE: Circuit Identifier is
not copied.
main/config/copy
Slot 4 Model: 8799
COPY PORTS
From: Port 1:
To: Port 2:
Perform Copy
Perform Copy Then Increment
--------------------------------------------------------------------------------
ESC for previous menu MainMenu Exit
Save
