Operation
3-11
3160-A2-GB21-80
March 1999
Setting Customer Identification
The customer identification is the only identity number you can change. It is used
to uniquely identify the DSU/CSU.
Procedure
To change the customer identification (CID):
1. From the top-level menu, press the
key until the Ctrl selection appears
on the screen.
2. Select Ctrl.
3. From the Control screen, press the
key until the CID selection appears
on the screen.
4. Select CID.
F1
Control:
Reset
CID Passwd
F2
F3
5. Use the
and
keys to position the cursor under the desired character.
You must enter a character before the
moves the cursor to the next
space to the right.
F1
CustID:
xxxxxxxx
Up
Down
Save
F2
F3
6. Enter the desired ID. Press F1 (Up) and F2 (Down) to scroll up and down
through the valid characters/numbers for the customer ID. Valid characters
are 0 through 9, #, -, ., /, A to Z, and blank space. Press F3 (Save) to save
the ID.
Summary of Contents for ACCULINK 3160
