Paradyne ACCULINK 3160, Operator'S Manual

Page: 243 / 296

SNMP MIB Objects
E-31 3160-A2-GB21-80 March 1999
Table E-1. SNMP MIB to Front Panel Command Cross-Reference (3 of 4)
Front Panel Command SNMP MIB Object
Test–>Lpbk–>DLB
Test–>Lpbk–>Abort–>DLB
Set dsx1LoopbackConfig for DTE T1 to
dsx1LineLoop
Set dsx1LoopbackConfig for DTE T1 to dsx1NoLoop
Test–>Lpbk–>RLB
Test–>Lpbk–>Abort–>RLB
Set dsx1LoopbackConfig for DTE T1 to
dsx1PayloadLoop
Set dsx1LoopbackConfig for DTE T1 to dsx1NoLoop
Test–>Lpbk–>DCLB–>Prt
n
Test–>Lpbk–>Abort–>DCLB–>Prt
n
Set IfExtnsTestType for port
n to
testFullDuplexLoopBack
Set dsx1LoopbackConfig for port
n to noTest
Test–>Lpbk–>DTLB–>Prt n
Test–>Lpbk–>Abort–>DTLB–>Prt n
Set IfExtnsTestType for port n to testLoopDTLB
Set dsx1LoopbackConfig for port n to noTest
Test–>Ptrns–>Send–>QRSS–>NET
Test–>Ptrns–>Abort–>Send–>NET
Set dsx1SendCode for Net T1 to dsx1SendQRSS
Set dsx1SendCode for Net T1 to dsx1SendNoCode
Test–>Ptrns–>Send–>QRSS–>Prt
n
Test–>Ptrns–>Abort–>Send–>Prt
n
Set IfExtnsTestType for port
n to testSendQRS
Set IfExtnsTestType for port
n to noTest
Test–>Ptrns–>Send–>1in8
Test–>Ptrns–>Abort–>Send–>NET
Set dsx1SendCode for Net T1 to
dsx1SendOtherTestPattern
Set dsx1SendCode for Net T1 to dsx1SendNoCode
Test–>Ptrns–>Send–>511–>Prt n
Test–>Ptrns–>Abort–>Send–>Prt n
Set IfExtnsTestType for port n to testSend511
Set IfExtnsTestType for port n to noTest
Test–>Ptrns–>Mon–>QRSS–>NET
Test–>Ptrns–>Abort–>Mon–>NET
Set ifExtnsTestType for Net T1 to testMonQRSS
Set ifExtnsTestType for Net T1 to noTest
Test–>Ptrns–>Mon–>QRSS–>Prt
n
Test–>Ptrns–>Abort–>Mon–>Prt
n
Set ifExtnsTestType for port
n to testMonQRSS
Set ifExtnsTestType for port
n to noTest
Test–>Ptrns–>Mon–>511–>Prt n
Test–>Ptrns–>Abort–>Mon–>Prt n
Set ifExtnsTestType for port n to testMon511
Set ifExtnsTestType for port n to noTest
Cnfig–>Load Cnfig–>Save Set devConfigAreaCopy to the desired choice (Active
to Customer1, etc.)
Cnfig–>Activ–>Edit–>DTE–>DTE–>Framing Set/Display dsx1LineType for DTE T1 to
dsx1ESF or
dsx1D4
Cnfig–>Activ–>Edit–>DTE–>DTE–>Coding Set/Display dsx1LineCoding for DTE T1 to dsx1B8ZS
or dsx1AMI
Cnfig–>Activ–>Edit–>Port–>Prtn->Port Type Display rs232PortType for port n to rs422 or v35