Paradyne 3166 DSU, User Manual

Page: 99 / 207

Monitoring and Testing
4-31
3166-A2-GB20-20 March 1999
6. When you are satisfied that all LEDs are lighting and the LCD is functioning
properly, abort the Lamp test from the Lamp Test screen. If there is no activity
on the DSU/CSU front panel for five minutes, the Device Health and Status
screen appears automatically. However, the Lamp test remains active until it
is aborted.
Aborting a Lamp Test
Procedure
To abort the Lamp test:
1. Display the Lamp Test screen. To do this when the LCD is alternating the
Lamp test screens, press any Function key. Otherwise, follow Steps 1
through 3 of
Starting a Lamp Test
on page 4-30.
F1
Lamp Test:
Abort
Start
F2 F3
2. From the Lamp Test screen, select Abort.
F1
Lamp Test:
Abort
Start
F2 F3