Paradigm SOUNDPLAY, Owner'S Manual

Page: 23 / 72

22
the power button on the control panel or remote
control. Activate by pressing the enter button and
the soundbar will respond with ‘Saved’.
Power Settings > Power-On Volume: Enter the
submenu by pressing the enter button. Here
you can configure the default volume of the
soundbar when it powers on or comes out of
standby.
Power Settings > Power-On Volume > Set:
Enter the submenu by pressing the enter but-
ton. Here you choose set the power-on volume.
Power Settings > Power-On Volume > Set >
–90dB to +10dB: Using the up/down directional
buttons, choose the desired volume level. Once
set the soundbar will always be set to this level
when it powers on or comes out of standby. The
default level is –35dB.
Power Settings > Power-On Volume > Last
Used: When Power Standby is set to “Last
Used”, the soundbar will power on or come out
of standby at a volume level matching the vol-
ume setting when it was powered off or went
into standby.
Power Settings > IP Control: Enter the submenu
by pressing the enter button. Here you can turn
IP Control off or on. IP Control allows the sound-
bar to respond to incoming IP commands from
networked home control systems connected via
Ethernet or Wi-Fi.
Power Settings > IP Control > Off or On: This
option turns the IP Control feature off or on.
Activate by pressing the enter button and the
soundbar will respond with ‘Saved’.
Power Settings > Standby IP > Off or On: Enter the
submenu by pressing the enter button. Here you
can turn Standby IP Control off or on. This allows
you to configure how the soundbar responds to
incoming IP commands when it is in standby mode.
Power Settings > Standby IP > Off or On: This
option turns the Standby IP Control feature off
or on. Activate by pressing the enter button and
the soundbar will respond with ‘Saved’. When
this setting is set to “Off” the soundbar will not
respond to incoming IP command when it is pow-
ered off or in standby mode. If IP Control is set to
Off, Standby IP Control is disabled.
MENU OPTION: WIRELESS SETUP
Wireless Setup: Enter the submenu by pressing
the enter button. Here you may setup a Bluetooth
connection.
Wireless Setup > Bluetooth Pairing: Enter the
submenu by pressing the enter button. Here you
may setup a Bluetooth connection.
MENU OPTION: LEARN REMOTE
Please note: There may be remotes that the
soundbar cannot learn or that the soundbar
can not learn correctly. Due to the number of
available remotes, it is impossible to advise
which remotes will or will not work.
Please note: When learning from a second
remote, you will likely find it does not have but-
tons that directly correspond with all available
soundbar commands. Not all commands have
to be programmed. Some remotes offer ‘func-
tion’ buttons (F1, F2, etc.) that can be used to
program unique soundbar commands such as
‘Bass Mode: Night’ or ‘Input: Optical 1’.
Please note: Some remote controls offer dis-
crete ‘power on’ and ‘power off’ buttons. Some
offer a single button to toggle power on and off.