Paradigm SOUNDPLAY, Owner'S Manual

Page: 11 / 72

10
Fig. 3
7mm
13.7mm
M6
mm
7.
21
mm
3.
01
3.2
2mm
CONNECTION
Turn your soundbar off before
making or breaking any signal
connections! WARNING! The
power cord should not be
installed, removed, or left detached from the
soundbar while the other end is connected to
an AC power source.
POWER CONNECTION
The power cord should be firmly inserted into
the AC power receptacle on the rear connection
panel of the soundbar, then to any convenient AC
wall outlet. The soundbar also integrates a signal
sensing power supply that automatically switches
into standby mode after sensing no audio signal
for approximately 20 minutes (this will only occur
when the menu’s power setting is set to ‘Auto
Standby’).
Fig. 4