Panduit ATLONA Omega AT-OME-MS52W Manual Download Page 94

Page: 94 / 123

AT-OME-MS52W

Configuration and Management Interfaces

RS-232

This section is only available when the

Control Type

is set to

RS-232

RS-232 Mode

Click this drop-down list to select the RS-232 mode.

Setting

Description

HDBaseT RS232 Only

Assigns settings for RS-232 settings over

HDBaseT OUT

. RS-232 commands will

only be transmitted over the

HDBaseT OUT

port.

Local RS232 Only

Assigns settings for RS-232 port for controlling the display over the local RS-232 port.

Both

HDBaseT OUT

and the

RS-232

port are used. Note that when using both ports,

the RS-232 settings must be identical.

Setting

Description

Baud rate

Sets the baud rate. The following options are available: 9600, 14400, 19200, 38400,

57600, 115200.

Data bit

Sets the number of data bits used to represent each character of data. The following

options are available: 7 or 8.

Parity

Sets the parity bit, which can be included with each character to detect errors during

the transmission of data. The following options are available: None, Odd, or Even.

Stop bit

Sets the stop bit. Stop bits are sent at the end of each character, allowing the client to

detect the end of a character stream. The following options are available: 1 or 2.

Baud Rate

Data Bits

Parity

, and

Stop Bits

The RS-232 settings for the selected RS-232 mode.

Summary of Contents for ATLONA Omega AT-OME-MS52W




























































































































Search results

Summary of Contents for ATLONA Omega AT-OME-MS52W

Reviews:

Related manuals for ATLONA Omega AT-OME-MS52W

Brands by name

Popular brands

Panduit ATLONA Omega AT-OME-MS52W, Manual

Search results

Summary of Contents for ATLONA Omega AT-OME-MS52W

Reviews:

Related manuals for ATLONA Omega AT-OME-MS52W

Brands by name

Popular brands