AT-OME-MS52W
33
Device Operation
6. Manual USB configuration is complete.
USB Host
Description
Host 1
USB HOST 1 port
Host 2
USB HOST 2 port
Remote Host
Uses the USB host port on the HDBaseT receiver
USB-C
USB-C port
Auto Switch
In this mode, the AT-OME-MS52W will detect which USB ports are connected to a host device. If all USB host ports
are connected to host devices, then the AT-OME-MS52W will set the last-connected USB host device as the “active”
USB host. Use the procedure below to enable Follow USB mode.
1.
Connect the host computers to the USB host ports, as desired. Note that it is not required that both USB host
ports be connected to host devices.
2.
Login to the web server. Refer to
Logging in to the Web Server (page 22)
for more information.
3. Click
USB Routing
in the menu bar.
4. Click the
USB Routing Mode
drop-down list and select
Auto Switch
.
5. Click the
USB Host
drop-down list and select the desired USB port.
