manualshive.com logo in svg

Panduit ATLONA Omega AT-OME-MS52W, Manual, Page: 101 / 123

Share
Download
Panduit ATLONA Omega AT-OME-MS52W Manual Download Page 101

AT-OME-MS52W

101

Configuration and Management Interfaces

IP Address 

Enter the desired IP address for the AT-OME-MS52W in this field.  This field can only be changed when 

Mode

 is set 

to 

Static

.

Network Mask 

Enter the subnet mask in this field.  This field can only be changed when 

Mode

 is set to 

Static

.

Gateway

 

Enter the gateway (router) address in this field.  This field can only be changed when 

Mode

 is set to 

Static

.

DNS Server #1 / DNS Server #2

 

Enter the DNS server addresses in the DNS Server #1 and DNS Server #2 fields.  If the AT-OME-MS52W will be used 

within an internal LAN, this information is not required.  This field can only be changed when 

Mode

 is set to 

Static

.

802.1x Security Enable

 

Click this checkbox to enable 802.1x authentication mode.  When enabled, the Radius server, Radius port, and 

Radius secret fields will be available.  Refer to 

802.1X Authentication (page 55)

 for more information.

Summary of Contents for ATLONA Omega AT-OME-MS52W




























































































































Reviews:

No comments