AT-OME-MS52W
19
Setting the IP Address using the Web Server
The IP mode of the AT-OME-MS52W can also be set using the built-in web server. In order to access the web server,
the IP address of the AT-OME-MS52W must be known. Refer to
Logging in to the Web Server (page 22)
for more
information.
1.
Open the desired web browser and enter the IP address of the AT-OME-MS52W.
2.
Login using the required credentials.
3. Click
Administration
>
Networking
.
4. Under the
Ethernet
window group, click the
Mode
drop-down list to select
DHCP
,
Static
, or
Factory Static
.
If set to
Static
, the
IP
,
Network Mask
,
Gateway
fields can be modified.
If set to
Factory Static
, then the IP settings will be set to the following values:
IP Address
192.168.1.254
Network Mask
255.255.0.0
Gateway
192.168.1.1
Both
DNS Server
fields can be modified when set to either
Static
or
Factory Static
mode.
5. Under the Save window group, click the
Save
button, next to
Save Changes
, to commit changes.
Installation
NOTE:
When saving network settings, the AT-OME-MS52W may prompt for a reboot.