AT-OME-MS52W
74
Device Operation
Occupancy Sensor
This method uses an occupancy sensor to control the display.
AutoSwitch
does not need to be enabled for this
feature to work.
1.
Login to the web server. Refer to
Logging in to the Web Server (page 22)
for more information.
2. Click
Display
in the side menu bar.
3. Click the
Display Control Method
drop-down list and select
Occupancy Sensor
.
4. The
Trigger I/O
window group will be displayed, along with two checkboxes:
Enable Trigger On
and
Enable
Trigger Off
.
Check the
Enable Trigger On
checkbox to enable a
power-on
state when the trigger voltage is pulled from low
to high. Check the
Enable Trigger Off
checkbox to enable a
power-off
state when the trigger voltage is pulled
from low to high. Either or both checkboxes can be enabled. When enabled, all other display power options are
overridden.
5. Setup is complete.
