PANDROL CD200 IQ, Operation And Maintenance Manual

Page: 7 / 82

7 av 82
OPERATION AND MAINTENANCE MANUAL I ENG_OMM_CD200IQ_P03 I 2023-03-16
@Pandrol 2023
2. Introduction
2.1. General
The purpose of this manual is to provide the owner and its users with the essential knowledge
for carrying out routine maintenance procedures necessary for the proper working of the
machine and for the purposes for which it is intended. All the information contained in this
manual must be READ and UNDERSTOOD before undertaking any attempt to maintain the
machine.
It is recommended that maintenance/overhaul is performed by qualified personnel from Pandrol
AB or personnel that have been trained by Pandrol AB. The manual referrers to a fully equipped
CD200 IQ, some of the tools are optional and this particular machine may miss a few of the
features.
Read the safety instruction in the user manual and shut off the machine before performing any
maintenance. See chapter “Start and Stop” in the operator´s manual
Warnings and safety precautions described in this document shall only be considered as a
minimum. National conditions, standards and regulations override conditions, standards and
regulations described in this document.
Any adjustments or service on the machine only allowed to be done by qualified personnel that
have read and understood this manual and have had training and information from Pandrol AB.
A copy of this manual must be kept with the machine at all times as it provides essential
maintenance and safety information, and details the mandatory requirements for the general
use of the machine.
In case of replacement of spare parts, always use Pandrol original spare parts to ensure that
the machine fulfil the correct safety requirements at all times. Incorrect spare parts will affect the
warranty of the machine.
To ensure that correct oils and grease are being used, see chapter “Technical Specifications”
in the operator´s manual for information of oil and grease specifications, volumes and colour
coding.
This manual is written according to the RIS-1530-PLT standard.
Training on how to use and work with the CD200IQ can be found on our YouTube channel,
”Training CD200IQ”.
© Pandrol AB
All rights reserved
No part of this manual may be reproduced, modified or copied without permission from Pandrol AB.