PANDROL CD200 IQ, Operation And Maintenance Manual

Page: 11 / 82

11 av 82
OPERATION AND MAINTENANCE MANUAL I ENG_OMM_CD200IQ_P03 I 2023-03-16
@Pandrol 2023
2.4. Safety warnings
1.1.2 Moving Parts
WARNING! – Risk of crushing.
During operation, parts of the machine are moving. Moving parts can cause serious personal
injury. To avoid accidents, follow the guideline below:
• Keep away from the machine and moving parts when operating the machine.
1.1.3 Pressurised Hydraulic Oil
WARNING! – Pressurised hydraulic oil
Hydraulic oil under high pressure is present in the hydraulic system. Fluids under high pressure
are dangerous and can cause serious personal.
To avoid accidents, follow the guidelines below:
1. Always shut off the engine before carrying out any maintenance work. See chapter “Start
and stop” in the operator´s manual.
2. Always wear appropriate personal-protection according to chapter 2.6 in this manual.
1.1.4 Live Current
DANGER! – Live current
High voltage live current is very dangerous and can cause serious injury or death of a person.
Contact with electric parts can damage the equipment if live current is present.
Always ensure that there is no live current present in the power lines or the third rail!
1.1.5 Vehicle in Operation
DANGER! – Machine in operation
Special precautions must be taken to ensure that operation of the machine will not result in
severe personal injury and/or damage to the equipment.
To avoid accidents, make sure that no unauthorized personnel are within 5 meters of the
machine when operation is started.
1.1.6 Danger due to unergonomic operation
WARNING!
With some activities there is a risk of injuring muscles, tendons, joints or bones if the necessary
caution is not exercised with the controls. Avoid adverse movements and poor posture. Avoid
static postures of the thumb and hand when using the controls.