background image

9 av 82

OPERATION AND MAINTENANCE MANUAL I ENG_OMM_CD200IQ_P03 I 2023-03-16 

 

@Pandrol 2023

 

         

•  The use of solvents as cleaning agents and the use of lubricants can involve health and/or 

safety hazards. The manufacturers of the solvents and lubricants should be contacted for 
safety data. The recommended precautions and procedures of the manufacturers should be 
followed.

•  Personal protection clothing and eye protection must be worn when undertaking work. Read 

chapter 2.6 in this manual for detailed information of protection clothing. 

•  When placing CD200IQ on track, choose a suitable place with as little interfering obstacles 

and with as firm and flat ground as possible. If the permissible per-person lifting weight is 

exceeded when lifting or carrying, there is a risk of injuring muscles, tendons, joints or bones. 

•  Ensure that the road to the workplace is safe and free from interfering obstacles to avoid 

accidents. 

•  The modules should only be manually handled in an emergency situation. Always use the 

handles to lift the modules. Always use two hands and address the modules symmetrically. 
Do not twist the spine when handling. Do not carry any of the modules more than 3 meters 
without a rest, or without using a mechanical aid. Contact your Health and Safety Advisor for 
more information. 

Summary of Contents for CD200 IQ



















































































Reviews: