PANDROL CD200 IQ, Operation And Maintenance Manual

Page: 23 / 82

23 av 82
OPERATION AND MAINTENANCE MANUAL I ENG_OMM_CD200IQ_P03 I 2023-03-16
@Pandrol 2023
(1)
(2)
(3)
(1)
(2)
(3)
(4)
(5)
(6)
4.3.1. Workhead FC/FE
The work head is designed to be able to both clip up and de-clip PANDROL FASTCLIP and FASTCLIP FE.
4.4. Workhead
4.4.1. Sleeper Lifter FC/FE
The sleeper lifter device enables the machine to lift low
laying sleepers up to 50 mm. This is done in a certain
sequence. This device also includes an adjustment
mechanism to accommodate for different rail section
heights. When the dead-mans-handle/sleeper lifter
control is pressed in towards the handlebar, the cylinder
takes its fully extended position, which is the normal
operation position.
Pos Description
(1) Height adjustment knob
(2) Lift cylinder
(3) Ril wheel
The tool is adjustable to enable work on different rail
heights (S49 to 141 RE, i.e. rail heights between 149-189
mm).
The work head utilizes the rail head as starting point at
declipping. The work head is easily adaptable to enable
clipping or declipping by changing the clipping/declipping
shoe and rotate the mechanical stop 180 degrees.
Fig 15.
Fig 14.
Pos Description Pos Description
(1) Clipping shoe (4) Adjustable heel plate
(2) Gripper arm (5) Double pin
(3) Mechanical stop for
declipping (6) Main arm