17 av 82
OPERATION AND MAINTENANCE MANUAL I ENG_OMM_CD200IQ_P03 I 2023-03-16
@Pandrol 2023
(1)
(2)
(3)
(4)
(5)
Fig 2.
Fig 3.
(6)
(7)
3. General Description
3.1. Intended Use
The Clip Driver CD200 IQ is designed and manufactured for clipping and de-clipping PANDROL
FASTCLIP and FASTCLIP FE, or PANDROL E-CLIP (depending on how the machine is
equipped). Switching from clipping to de-clipping is easy since the Clip Driver CD200 IQ uses
the same head for both clipping and de-clipping and it is also easy to setup for different rail
gauges and inclinations. Choose the type of tool in the control panel (2).
The Clip Driver CD200 IQ is rapid and easy to use and it is ergonomically operated by one
single operator. The Clip Driver CD200 IQ can clip on both rails by sliding the unit from one
side to the other. The clipping capacity is up to 30 sleepers per minute. The CD200 IQ can be
separated into 3 pieces.
3.2. Main Components
Fig 4.
Pos Description
Pos Description
(1)
Height adjustable handlebar
(5)
Main unit
(2)
Control panel
(6)
Identification plate
(3)
Work head FC/FE
(7
Work head e-clip
(4)
Trolley unit
* Please note that the machine pictured above may be fitted with extra equipment. Pandrol AB reserves the right to
change any technical details without prior notice.
Summary of Contents for CD200 IQ
Page 2: ...2 av 82 OPERATION AND MAINTENANCE MANUAL I ENG_OMM_CD200IQ_P03 I 2023 03 16 Pandrol 2023...
Page 53: ...53 av 82 OPERATION AND MAINTENANCE MANUAL I ENG_OMM_CD200IQ_P03 I 2023 03 16 Pandrol 2023...
Page 80: ...80 av 82 OPERATION AND MAINTENANCE MANUAL I ENG_OMM_CD200IQ_P03 I 2023 03 16 Pandrol 2023...
Page 81: ...81 av 82 OPERATION AND MAINTENANCE MANUAL I ENG_OMM_CD200IQ_P03 I 2023 03 16 Pandrol 2023...