Auto focus: When the buttons are clicked, the auto focus function starts to automatically adjust focus based
on a subject located in the center of the screen.
reset: Returns to the automatic adjustment position set in step 1 the basic installation settings. (page 23)
If not set, returns to the default position.
Note
•
Because the
or
only slightly adjusts the focus each time they are clicked, it may appear that
focus is not changing. To adjust the focus in larger amounts, click and hold the buttons.
IMPORTANT
•
In the following locations or with the following subjects, the focus may not be able to be automatically
adjusted. In this case, manually adjust the focus.
–
when the subject moves a lot
–
when there are large changes to the lighting intensity
–
when the light level is low
–
when the subject or location is extremely bright or reflective
–
when viewing through windows
–
when the dome cover is in a location where it can easily become dirty
–
locations where there is not much contrast such as a white wall
–
when there is harsh flickering
Operating Instructions
47
2 Settings
